Deister Electronic GmbH UDL500 사용자 설명서
2.5 UDL500: Control digital output via software trigger
Installation notes: We recommend professional grounding of the device (see 2.1
Installation note). Output OUT is potential-free. Take care that the grounding will be
sufficient (use second tab connector)!
Installation note). Output OUT is potential-free. Take care that the grounding will be
sufficient (use second tab connector)!
The reader can be controlled by a trigger signal via software. Therefore, it is not necessary
to use the potential-free input IN. The control of the potential-free OUT can be configured
within the software. For this the reader has to be operated in trigger mode.
to use the potential-free input IN. The control of the potential-free OUT can be configured
within the software. For this the reader has to be operated in trigger mode.
In the following example of circuits the output has not been potential isolated:
UDL500 housing
8
deister electronic GmbH 30890 Barsinghausen Germany
V17/01/08
Wiring & Installation Instructions UDL500