Mascot Electric Co. Ltd. GT-3 사용자 설명서

BALANCED

UNBALANCED

AUDIO OUTPUT

LINE

8/9

6/7

10/11

L OUTPUT R

CHANNEL

MIC

DC INPUT
12V 500mA

AC/DC ADAPTER

1. Antenna: Fixed-length UHF antenna permanently mounted either on the front panel..

2. Power Indicator: The indicator LED lights when the receiver is ready to operate.

3. AF Indicator: The indicator glows to indicate that audio signal has been received.

4. Diversity A. B Indicator: This LED lights to show that antenna has received the RF

Signal.

5. RF Indicator: This LED lights to indicate that signal is being received

6. Balanced Output: 3-pin XLR connector provides balanced low-impedance output

7. Unbalanced Output: Unbalanced 6.3mm mono jack audio output for connecting to,

e.g., a guitar amplifier.

8. Mic/Line Switch: Select output of XLR balanced connector or 6.3

ϕ unbalanced phone

jack. It can be set for microphone (-20dB) or line-level (0dB).

9. Channel Selector: 16 different selectable frequencies as below

10. Squelch Adj. : The squelch adjusts the output level to prevent from the external noise.

Setting the squelch too high will reduce the range of the system. Set the squelch to
minimum before turning the receiver on.

11. Mixing Switch: When the MIXING switch is in the OFF position, the XLR output for

channels 1 and 2 are separated. When the MIXING switch is in the ON position, the XLR
output for channels 1 and 2 are mixed, so that both XLR outputs have conbined signal
from both channel 1 and channel 2.

12. DC IN: DC input connector for the supplied AC adapter.

WIRELESS

PRODUCT DESCRIPTION

BASIC CONNECTIONS

WIRELESS

6. Basic Connections

Connect the receiver output to the audio mixer or amplifier input, using a standard audio
cable with 6.3

ϕ phone plugs. Never use the balanced and unbalanced audio outputs at

the same time! This may cause signal loss or increased noise.

AUDIO MIXER

AMPLIFIER

LOUDSPEAKER