Lutron Electronics Company Inc 0037 사용자 설명서
2
Installation
Battery Installation (-C Models)
1.
Remove battery cover.
2.
Install batteries as shown. Use two 1.5V AAA
alkaline batteries only.
alkaline batteries only.
3.
Replace battery cover.
Adapter Installation (All Models)
Mounting Diagram
RF Tabletop Keypads may be wall mounted using the
supplied wall bracket.
supplied wall bracket.
Plug in power
cord and
adapter
cord and
adapter
1.
Attach wall bracket to wall using the supplied
screws and wall anchors.
screws and wall anchors.
2.
Wrap excess adapter cord (if using) around the
cord holder. Align keypad and snap onto wall
bracket.
cord holder. Align keypad and snap onto wall
bracket.
Note: Battery-powered models only
• The RF Tabletop Keypad goes to “sleep” after a
short period of inactivity.
• Press any button to “wake up” the keypad.
Refer to battery
installation diagram
molded inside battery
compartment.
installation diagram
molded inside battery
compartment.
1.
Find a suitable location for the RF Tabletop
Keypad. Place the keypad in a convenient and
accessible location. Note: RF Keypads must be
located within 30 feet (10m) of an RF Signal
Repeater or an RF Processor.
Keypad. Place the keypad in a convenient and
accessible location. Note: RF Keypads must be
located within 30 feet (10m) of an RF Signal
Repeater or an RF Processor.
2.
Apply power to the RF Tabletop Keypad.