Trimble Inc. 5580090 사용자 설명서
6 Configuring the SPSx50 Using the Keypad and Display
62 SPSx50 Modular GPS Receiver User Guide
Configuring the receiver
1.
In the Home screen, press
L
. Use the Operation Mode screen to configure
system settings, mode settings, or to view the SV (satellite) status. Mode Settings
is the default setting.
is the default setting.
2.
Press
L
. Use the Mode screen to select whether the receiver will operate as a
base or rover. Base is the default setting.
3.
Press
L
. Use the Base Station screen to select whether the receiver is going to
use a “Here” position or if the current coordinates in the receiver will be
changed.
changed.
4.
Press
G
. When
Edit Current
begins to flash, the receiver is in Edit mode and
you can change the current setting.
5.
Press
K
. The setting changes to New Base (Here).
6.
Press
L
to accept the change.
7.
Press
L
again. The Base Name screen appears. See next.
Changing the name and description of the base station
In the Base Name screen:
1.
Press
G
. When the first character of the base name begins to flash, the receiver
is in Edit mode and you can change the current setting.
2.
Press
J
or
K
to change the value of the character.
3.
Press
G
to move the cursor to the next character.
4.
Repeat Step 2 through Step 3 to enter the name of the base station. The name
can be up to 16 characters. Press
can be up to 16 characters. Press
L
to accept the change.
5.
Press
L
again. Use the Base Code screen to change the code (description) for
the base station.
6.
Press
G
. When the first character of the base code begins to flash, the receiver
is in Edit mode and you can change the current setting.
7.
Press
J
or
K
to change the value of the character.
8.
Press
G
to move the cursor to the next character.
9.
Repeat Step 7 through Step 8 to enter the code of the base station. The code can
be up to 16 characters.
be up to 16 characters.
10. Press
L
to accept the change.
11. Press
L
again. The Base Latitude screen appears. See next.