Yaesu Musen Co. Ltd. 20251X50 사용자 설명서
FT-2000
Operating Manual
Vertex Standard Co., Ltd.
116
Available Values: EnA (Enable)/diS (Disable)
Default Setting: diS (Disable)
062 A1A QSKTIME
Function: Selects the time delay between when the PTT is keyed and the carrier is
transmitted during QSK operation when using the internal keyer.
Available Values: 15/20/25/30 msec
Default Setting: 15 msec
MODE-DAT Group
063 dAtA DATA IN
Function: Selects the data input to be used on the PKT mode.
Available Values: dAtA/PC
Default Setting: dAtA
dAtA: Uses the data input line which is connected to the rear panel’s PACKET jack
Default Setting: diS (Disable)
062 A1A QSKTIME
Function: Selects the time delay between when the PTT is keyed and the carrier is
transmitted during QSK operation when using the internal keyer.
Available Values: 15/20/25/30 msec
Default Setting: 15 msec
MODE-DAT Group
063 dAtA DATA IN
Function: Selects the data input to be used on the PKT mode.
Available Values: dAtA/PC
Default Setting: dAtA
dAtA: Uses the data input line which is connected to the rear panel’s PACKET jack
while using the PKT mode.
PC:
Selects the microphone connected to the optional DMU-2000 Data
Management Unit while using the PKT mode.
Management Unit while using the PKT mode.
064 dAtA DT GAIN
Function: Sets the data input level from the TNC to the AFSK modulator.
Available Values: 0 ~ 100
Default Setting: 50
065 dAtA DT OUT
Function: Selects the receiver to be connected to the data output port (pin 4) of the
PACKET jack.
Available Values: nAin (Main)/Sub (Sub)
Default Setting: nAin (Main)
066 dAtA OUT LVL
Function: Sets the AFSK data output level at the output port (pin 4) of the PACKET
jack.
Available Values: 0 ~ 100
Default Setting: 50