Yaesu Musen Co. Ltd. 20251X50 사용자 설명서

 

FT-2000 

Operating Manual 

Vertex Standard Co., Ltd. 

45

operate. Only those Amateur bands that have not been skipped will appear as you 
scroll through the bands. 

 
Band Stack Operation 
The FT-2000 utilizes a triple band-stack VFO selection technique, that permits you to 
store up to three favorite frequencies and modes onto each band’s VFO register. For 
example, you may store one frequency each on 14 MHz CW, RTTY, and USB, then 
recall these VFOs by successive, momentary presses of the [14] MHz band button. Each 
Amateur band key may similarly have up to three frequency/mode settings applied. 
Both the Main (VFO-A) and Sub (VFO-B) systems have their own, independent, band 
stacks. 
 
A typical setup, for the 14 MHz band, might be arranged like this: 
1.  Program 14.0250 MHz，CW Mode, then press the [14] MHz band button; 
2.  Program 14.080 MHz，RTTY Mode, then press the [14] MHz band button; 
3.  Program 14.195 MHz, SSB Mode, then press the [14] MHz band button. 
 
With this configuration, successive momentary presses of the [14] MHz band button 
will allow you to toggle sequentially through these three VFOs. 
 
C.S (Custom Switch) 
An often-used Menu mode selection may be brought out to the front panel’s [C.S] 
button. 
 
C.S Setup 
1.  Press the [MENU] button to engage the Menu mode; the Menu list will appear on 

the display. 

2.  Rotate the Main Tuning Dial knob to select the Menu item you want to be able to 

access via the [C.S] button. 

3.  Press and hold in the [C.S] button for two seconds to lock in your selection. 
4.  Press and hold in the [MENU] button for two seconds to save the new 

configuration and exit to normal operation. 

 
Menu Selection Recall via [C.S] button 
Press the [C.S] button. 
The programmed Menu item will appear on the display. You may now rotate the [SUB