ADC Telecommunications Inc. PSM25TDH 사용자 설명서

FWPP-501-01 Issue 1

•

320000117795 Rev A

FlexWave Prism Remote Unit and HDM RF Module Installation Guide

© March 2016 CommScope, Inc.

Page 65

Install the Prism Remote Unit

Option C: ProAx Connector (Legacy AC-Powered PRUs)

NOTE:

Use the following procedure to install the fiber cables using a legacy ProAx Connector.

• If the PRU that you are installing has a Hardened Multi-Fiber Optic Connector, follow the

• If the PRU that you are installing has a Fiber Pass-Through Connector, follow the procedure

NOTE:

The ProAx Connector will become obsolete effective 31 May 2013, and will not be used in
PRUs manufactured after 31 May 2013.

NOTE:

DC-powered PRUs do not have a ProAx connector option.

A PRU with the ProAx Connector configuration requires the purchase of a ProAx cable assembly for the

Prism to interface with the OSP fiber. The fiber cable connector is a BX. four-port fiber connector, as

shown in the following picture: