TransCore 2611SS 사용자 설명서
E-3
Appendix E
Connector Pin-outs
This appendix provides connector pin-out information for the IT2020
Reader Logic Card and the IT2611 RF Module.
Reader Logic Card and the IT2611 RF Module.
IT2020 Reader Logic Card
This section provides pin-outs for the interface connectors on the IT2020 Reader
Logic Card.
Logic Card.
Tag Data/Control
The communication path between the IT2020 Reader Logic Card and the IT2611 RF
Module runs through the input/output (I/O) module that is connected to IP slot A. The
I/O module connects to the RF module through a ribbon cable terminating at a DB-25
connector mounted on the RF module interface bracket. The tag data/control cable
from the RF module connects to this DB-25 connector.
Module runs through the input/output (I/O) module that is connected to IP slot A. The
I/O module connects to the RF module through a ribbon cable terminating at a DB-25
connector mounted on the RF module interface bracket. The tag data/control cable
from the RF module connects to this DB-25 connector.
Table E-1 shows the pinout of the DB-25 connector. Signal I/O is with respect to the
reader logic card.
reader logic card.
Table E-1 Tag Data/Control Interface Connector
Pin
Name
Type
Description
1
IF_A+
Input
IT2200 tag data, channel A+
2
Unused
N/A
N/A
3
IF_B-
Input
IT2200 tag data, channel B-
4
IF_C+
Input
IT2200 tag data, channel C+
5
Unused
N/A
N/A
6
MOD-
Output
Downlink modulation data, negative
7
Unused
N/A
N/A
8
CTL_RCV-
Input
Communication with RF module
9
CTL_XMT+
Output
Communication with RF module
10
Unused
N/A
N/A
11
UL_RF_OFF-
Output
RF uplink power on/off, negative