Lotek Wireless Inc SRX800 사용자 설명서
1.9 12 V Power Input
A DC Power Supply ranging from 11 to 16 V and 300mA must be connected to the receiver via a
power cable. The red alligator clip should be connected to the positive terminal, and the black
alligator clip to the negative one.
power cable. The red alligator clip should be connected to the positive terminal, and the black
alligator clip to the negative one.
Just in case, the receiver is protected against over-voltage and polarity reversal. However, chek
fro the proper polarity before turning on the receiver.
fro the proper polarity before turning on the receiver.
1.10 GPS Antenna Input
The receiver is equipped with a GPS receiver, but it requires an active external antenna. Make
sure the GPS antenna is located in an area where there is clear access to the sky. If thi sis not
possible, the antenna should be placed in the proximity of a window.
sure the GPS antenna is located in an area where there is clear access to the sky. If thi sis not
possible, the antenna should be placed in the proximity of a window.
Use the GPS active provided by Lotek (SMA connector)