Lotek Wireless Inc SRX800 사용자 설명서
1.11 VHF Antenna Connectors
The four BNC VHF antenna connectors are shown in the figure bellow on the right. 50 Ohm
antennas should be used to ensure proper matching with the receiver.
antennas should be used to ensure proper matching with the receiver.
The four antennas are labeled as A1,A2, A3, and A4.
It is important to ensure that the connector caps provided attached to the antenna
connector on a short chain, be tightly fastened to the antenna connector when it is not in
use. This will prevent water from breaching the enclosure and damaging the receiver.
connector on a short chain, be tightly fastened to the antenna connector when it is not in
use. This will prevent water from breaching the enclosure and damaging the receiver.
Figure 1 Antenna Inputs