Silitek Corporation R97SK 사용자 설명서

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Getting Start for Using Wireless Keyboard and Mouse 

 

1. 

Turn off the power of your computer. Before starting up, insert two AAA batteries into the mouse 
and two AA batteries into the keyboard. 

 
2. 

Connect the receiver’s purp le keyboard cable to the computer’s keyboard port and the green cable to 
the mouse port. Place the receiver about eight inches(20 cm) from any electrical devices to avoid 
possible interference. 

 
3. 

Start up the computer.  

 
4. 

Place the driver CD in the CR-ROM. Click Next on all prompts and then click Finish. Follow the on 
screen instruction, you may also need to insert your Windows 98 Second Edition CD and browse the 
necessary files for complete installation. 

 
5. 

Adjust the Channel assignment is the same from the Receiver to the keyboard and mouse. Press one 
of the Windows keys and confirm customization launch. Move the mouse to confirm movement.   
 

 

 
 
 
 
 
 
 

The ID setting is to prevent the interference between two Keyboards and two Mouse when at the 
same channel within interference range.   
 
The Wireless Keyboard ID code 
Each keyboard was assigned an unique ID code at manufacturing. 
It prevents other Wireless keyboard radio signals from operating 
on your computer. This feature can be disengaged from pressing 
the ID Connect  button on the Receiver to turn off the ID LED. It 
will then allow other Wireless pointing devices to operate in your 
computer when at the same channel.