GatesAir Inc. CZF 사용자 설명서
APEX
™
Exciter Incorporating FLO
™
Technology
Details of the System Setup Screens
Navigating the LCD Display Screens
26
04s30
0.fm
03/08/07
888-2604-001
Page: 3-53
WARNING: Disconnect primary power prior to servicing.
3.6.8
Change Passwords > Security Setup
PasswordSetup.bmp
Figure 3-45 Security Setup Screen
Two passwords can be entered in the change passwords > security setup screen, refer to
Figure 3-45. They are:
Figure 3-45. They are:
• User Password: This password is needed to unlock the User Setup entry on the Sys-
tem Setup screen (shown in Figure 3-46, on page 3-54), if it is locked.
• Diagnostics Password: This password is needed to unlock the Diagnostics Setup entry
on the System Setup screen (shown in Figure 3-46, on page 3-54), if it is locked.
The frequency select and frequency offset entries on the exciter setup screen are
locked when the diagnostics setup is locked.
locked when the diagnostics setup is locked.
If either password change screen is entered, an alpha/numeric touch keypad is displayed
with the current password is shown at the top. To change a password:
with the current password is shown at the top. To change a password:
1
Use the keypad to type a new password.
A
The password is case sensitive. The password must be entered with the cor-
rect case to unlock a function.
rect case to unlock a function.
B
Spaces can be used as part of a password.
C
If spaces are used at the end of the password, or one or more spaces are used
entirely as a password, they will not show up when the System Setup >
Change Password screen is entered, but they must be correctly entered to un-
lock that function.
entirely as a password, they will not show up when the System Setup >
Change Password screen is entered, but they must be correctly entered to un-
lock that function.
2
When the new password is entered, it can be accepted by pressing Done, or the old
password can be retained by pressing Cancel.
password can be retained by pressing Cancel.