Philips Consumer Lifestyle HTB3525BVF7 사용자 설명서

다운로드
페이지 138
34
EN
9 Troubleshooting
Warning
 
Risk of electric shock. Never remove the casing of the 
product.
To keep the warranty valid, never try to repair 
the product yourself. 
If you have problems using this product, check 
the following points before you request service. 
If you still have a problem, get support at www.
philips.com/support. 
Main unit
The buttons on the SoundStage do not work.
•  Disconnect the SoundStage from the 
power supply for a few minutes, then 
reconnect.
•  Make sure that the touch buttons surface 
is not in contact with any conductive 
material, like water drop, metal, etc.
Picture
No picture.
•  Make sure that the TV is switched to the 
correct source for the SoundStage.
No picture on a TV connected through HDMI.
•  Make sure that you use a High Speed 
HDMI cable to connect the SoundStage 
and TV. Some Standard HDMI cables do 
not display properly for some images, 3D 
video, or Deep Color.
•  Make sure that the HDMI cable is not 
faulty. If it is faulty, replace it with a new 
cable.
•  Press   and then 731 on the remote 
control to restore the default picture 
resolution.
'Picture and video settings' on page 25).
Disc does not play high-definition video.
•  Make sure that the disc contains high-
definition video.
•  Make sure that the TV supports high-
definition video. 
•  Use an HDMI cable to connect to the TV.
Sound
No sound from SoundStage.
•  Connect the audio cable from your 
SoundStage to your TV or other devices. 
However, you do not need a separate 
audio connection when the SoundStage 
and TV are connected through an HDMI 
ARC connection.
(see 'Set up the audio' on page 12).
settings (see 'Restore default settings' on 
page 27), and then switch it off and switch 
on again.
•  On your SoundStage, press SOURCE 
repeatedly to select the correct audio 
input.
Distorted sound or echo.
•  If you play audio from the TV through 
the SoundStage, make sure that the TV is 
muted.
Audio and video are not synchronized.
•  1) Press  . 2) Press the Navigation 
buttons (left/right) to select [Audio 
sync], and then press OK. 3) Press 
the Navigation buttons (up/down) to 
synchronize the audio with the video.
Play
Cannot play a disc.
•  Clean the disc.
the region code of disc (see 'Region codes' 
on page 30).
HTB3525B_F7_UM_V1.0.indb   34
12/10/2013   6:04:01 PM