HARRIS CORPORATION M7200VTAC 사용자 설명서
MM-011553-001
6.25 SCANNING
Three scanning modes are available for the radio, but only one can be active at any time. Changing the
scanning mode changes the way the radio scans voice calls for all of profiles in the radio personality, no
matter which profile is or becomes active.
scanning mode changes the way the radio scans voice calls for all of profiles in the radio personality, no
matter which profile is or becomes active.
As described in Table 6-6, the choice of scanning mode changes the span of communications with all the
talk groups in the radio’s profiles, but does not affect interaction with the talk groups.
talk groups in the radio’s profiles, but does not affect interaction with the talk groups.
Table 6-6: Scan Modes
SCAN
MODE
EXPLANATION
No Scan
Eliminates distractions.
Full communications (transmit and receive) on selected talk group.
No calls received from other talk groups.
Full communications (transmit and receive) on selected talk group.
No calls received from other talk groups.
Normal
(Default)
(Default)
Full communications (transmit and receive) on the selected talk group.
Scans all talk groups in the active profile that are not locked out.
Receive calls from more than one talk group, if available from the current site.
Allows dragging of the selected, default emergency, P1, and P2 talk groups to the site on
which the radio is registered. (If other calls are available at the site, they also can be heard
but they will not be actively dragged.)
An emergency-enabled talk group is only dragged if it is in emergency mode.
Scans all talk groups in the active profile that are not locked out.
Receive calls from more than one talk group, if available from the current site.
Allows dragging of the selected, default emergency, P1, and P2 talk groups to the site on
which the radio is registered. (If other calls are available at the site, they also can be heard
but they will not be actively dragged.)
An emergency-enabled talk group is only dragged if it is in emergency mode.
The priority groups are fixed to the selected profile’s pre-defined P1 and P2 groups
(configured via the UAS). In this mode, P1 and P2 groups CANNOT be locked out.
(configured via the UAS). In this mode, P1 and P2 groups CANNOT be locked out.
Fixed
6.25.1 Checking
or
Changing Active Scan Mode
The currently active scan mode does not appear in the dwell display. To check it, access “ScnModeMenu”
and observe it in the top line of the display. To change the active scan mode:
and observe it in the top line of the display. To change the active scan mode:
1. Use
to scroll through the menus until “ScnModeMenu” appears in the display.
2. Use
to scroll through the scan options until the desired mode appears. See Table 6-6.
6.25.2 Scanning
Priority
The following lists the scanning priority order (from highest to lowest):
1. Selected talk group in emergency state.
2. Default emergency group in emergency state.
3. Selected talk group.
4. Emergency capable group in emergency state
5. Priority 1 talk group.
6. Priority 2 talk group.
7. Other (non-priority)
29