Dongbu Daewoo Electronics Corporation AXI515 사용자 설명서
Declaration of Conformity
Hereby, GM declares that this product MDMTEC 1100 is in compliance with:
• The essential requirements and other relevant provisions of Directive 1999/5/EC
• All other relevant EU Directives
Installing the Bluetooth Handsfree Kit
Guidelines for Installation and Connection
• Only qualified personnel should install this car kit. If necessary, contact with vehicle
manufacturer for air bag information specific to the vehicle.
Caution: An air bag inflates with great force. DO NOT place objects, including communication
equipment, in the area over the air bag or in the air bag deployment area. If the communication
equipment is improperly installed and the air bag inflates, serious injury could occur.
• Mount components securely on strong surfaces to prevent shifting that could cause injury or
interfere with safe vehicle operation. Always use the supplied mounting hardware
• Mounted components and attached wires or cables must not interfere with seating or leg
space.
• Route cables so they are protected from pinching, sharp edges, and crushing. Keep all in-line
connectors easily accessible.
• This car kit is intended for use in 12 volt negative ground systems only.
How to Install the Bluetooth Hands free Kit
Caution: This car kit must be connected to GM car to prevent fire or other damages if a short
circuit should occur somewhere in the electronic module.
Before installing the car kit, disconnect the vehicle’s battery.
Note: The Bluetooth hands free audio has been optimized for the internal car speaker.
Bluetooth hands free Kit Contents
Interface Cable
The Interface Cable connects the electronic module to the audio system components.
It connects the vehicle’s power and ignition to the Bluetooth hands free kit, sensor module and
provides some optional audio connections when the car kit is used with the vehicle’s radio.
Electronic Module
You can place the electronic module somewhere inside the vehicle..