Dongbu Daewoo Electronics Corporation AXI515 사용자 설명서
Car radio with ISO( AMP 18 PIN, USCAR ) sockets : Disconnect the speaker harness.
Connect the ISO( AMP 18 PIN, USCAR ) connector (car radio side) to the car radio, and
connect the ISO( AMP 18 PIN, USCAR )connector (car speaker side), to the speaker harness.
Installing the Sensor with Microphone
1. Select a suitable mounting location and mount the microphone:
• It is recommended that the microphone be mounted on the headliner between the driver
and passenger.
• Locate the microphone no more than 16 inches
(40 cm) from the driver's mouth and out of direct air flow from vent or defrost.
z The wire comes out the back of the the Sensor with Microphone.
• Do not allow anything (such as a rear-view mirror or sun visor) to block the path between the
microphone and the driver.
• Mount the microphone firmly so that vibrations do not affect audio quality.
Caution: The location of the microphone MUST NOT interfere with the vehicle’s air bag
deployment.
2. First, insert the clip and fix the sensor module to the clip
3 Connect the microphone to the interface cable.
Using Your Car Kit
User Interface Remote Control buttons
The UIRC enables you to set up and use the Bluetooth
®
Hands Free Car Kit.
PLAY: playback voice memo
REC: recording voice memo & speaker output
STOP:
press: recording stop
playback stop
press & hold : auto answering ….toggle
HF: send / redial / talk
END: reject incoming call
end all calls
TRANSFER(phone diagram)
Press :Transfer to phone or hands free….toggle
Press and hold : pairing new phone or disconnect the phone