Shure ULX2A 사용자 설명서

11

Open the battery cover and insert a fresh 9V alkaline or lithium battery, as shown in Figure 20. 

1. 

FIGURE 20 

If you are using a Bodypack system with a Shure lavalier microphone or instrument adapter, plug the microphone cable 

1. 

or instrument adapter cable into the transmitter input connector, as shown in Figure 21. 

NOTE:  

The wiring of the input connector on the transmitter is designed for Shure microphones. 

FIGURE 21 

NOTE: 

DO NOT turn on the transmitter before powering up the receiver. Once the receiver has located an 
open frequency, turn the transmitter on and set it to that receiver frequency. Turning the transmit-
ter on fi rst will interfere with the receiver’s frequency scanning function. 

1.  Slide the transmitter ON/OFF switch to the ON position, as shown in Figure 22. The power LED will momentarily glow 

red, then change to a steady green. The default frequency setting (Channel 1, Group 1) will appear on the display. 

FIGURE 22