Vertical Communications 7500-00 사용자 설명서

Assembling the IP Phone

2-3

Assembling the IP Phone

After removing the IP phone from the package, you will see the back of IP phone as 

shown in the following illustration. The phone (1) is already assembled with three frames. 

The U-type leg (3) is used with the big U-type frame (4) that has three step cavities for 

three angle positions. Another small U-type frame (5) is fastened to the big U-type frame 

(4) and the main body of phone (1). You may find these frames are locked together with 

different latches (6), (7), and (8) respectively. Do not touch latches (7) and (8). The 

latch (6) will be removed if you are do a wall-mount.