Rockwell Collins Inc. 8222210 사용자 설명서

D r a f t 1 A - C I S C O C O N F I D E N T I A L

2-10

Cisco Aironet 1240AG Series Access Point Hardware Installation Guide

OL-7293-01

Chapter 2 Installing the Access Point

Mounting Above a Suspended Ceiling

The bracket mounting clip requires the use of an access point mounting plate (700-13520-03) with two
extra holes (see

Figure 2-6

Figure 2-6

Mounting Plate Holes

----- TBD -----

Follow these steps to mount the access point above a suspended ceiling.

Step 1

Insert the bracket mounting clip’s tab into the large hole on the access point mounting plate.

Step 2

Place the clip over the T-bar box hanger and secure it to the access point mounting plate (see

Figure 2-7

)

with the 1/4-20 fastener (supplied with the T-bar hanger).

Figure 2-7

Access Point Mounting Plate

---- TBD -----

Note

The illustration shows the access point mounting plate mounted perpendicular to the T-bar box
hanger. You can also mount the bracket parallel to the T-bar box hanger.

Step 3

Determine the location in the ceiling where you will mount the access point and remove an adjacent
ceiling tile.

Step 4

Orient the access point 2-GHz and 5-GHz antennas so that they are pointing down when mounted on the
T-bar Box hanger.

Extra holes

95748

95739