Uniden America Corporation UB315 사용자 설명서
25
6:CLONE
You can clone all the programming, including
frequencies, talkgroups and alpha tags as well as
bank settings and other parameters from one
BC250D to another.
frequencies, talkgroups and alpha tags as well as
bank settings and other parameters from one
BC250D to another.
7:DATA SKIP
A scanner will normally stop on any transmission it
receives. This means the BC250D will occasionally
stop on data signals and unmodulated transmissions.
You can automatically skip many of these types of
transmissions during search.
receives. This means the BC250D will occasionally
stop on data signals and unmodulated transmissions.
You can automatically skip many of these types of
transmissions during search.
8:SQ MODE
The SQ Mode allows you to set at your option,
whether the scanner will stop on all active
transmissions on a particular frequency or it will only
respond to transmissions with a pre-set subaudible
tone. This applies to both conventional search and
scan modes. The options are as follows:
1. CSQ - The default setting is CSQ (carrier
whether the scanner will stop on all active
transmissions on a particular frequency or it will only
respond to transmissions with a pre-set subaudible
tone. This applies to both conventional search and
scan modes. The options are as follows:
1. CSQ - The default setting is CSQ (carrier
squelch). In this mode the scanner will stop on
any transmission on a programmed frequency
(Squelch mode does not apply to trunking).
any transmission on a programmed frequency
(Squelch mode does not apply to trunking).
2. TONE SQ - In Tone Squelch mode, if you have
set a subaudible tone (CTCSS or DCS) for a
frequency, the scanner will only stop on that
frequency if the transmission includes the
prescribed tone.
frequency, the scanner will only stop on that
frequency if the transmission includes the
prescribed tone.
3. TONE SEARCH - In this mode, as soon as the
scanner stops on any (non-trunked) channel, the
scanner will begin to search for any subaudible
tone that is being used on a transmitted
frequency. The scanner will check each CTCSS
tone sequentially and it will find DCS tones
instantly.
scanner will begin to search for any subaudible
tone that is being used on a transmitted
frequency. The scanner will check each CTCSS
tone sequentially and it will find DCS tones
instantly.
9:BANK TAG
Allows you to set an alphanumeric text tag for
individual banks in the scanner (1-10).(The "0" key
represents Bank number 10.) For example, you may
wish to set the Bank one text tag as Law
Enforcement, the second bank as Fire, etc.
individual banks in the scanner (1-10).(The "0" key
represents Bank number 10.) For example, you may
wish to set the Bank one text tag as Law
Enforcement, the second bank as Fire, etc.
10:BATTERY SAVE
When you set BATTERY SAVE to on in this menu,
BATTERY SAVE is active in Scan hold mode(except
priority scan mode).
BATTERY SAVE is active in Scan hold mode(except
priority scan mode).
:APCO Card
When you set optional card (Bci25D) and
select
select
ENABLE
in this mode, you can
activate Digital Communications. See page
76 for details.
76 for details.
BC250D 9/20/2 2:52 PM Page 25