Uniden America Corporation UB315 사용자 설명서

Note: • To clear a mistake while entering the frequency,

press 

(decimal key) repeatedly until the 

display is cleared.

• If you enter a channel or 

frequency which is out of the
scanner’s range, a beep will
sound and 

ERROR

appears on

the display.

• You can change a channel or

frequency by using VFO. 
To switch the setting for VFO
control, press and hold
HOLD/MAN for 2 seconds to
toggle between 

ROTARY:

CHANNEL

or 

ROTARY:

FREQUENCY

on the display.

• After programming frequencies for each bank, you

can also change the step size or the mode.(See
page 101)

1. Press MENU/BACK.

2. Select 

SCAN OPTION

-

CONVENTIONAL

by rotating

the VFO and pressing E.

3. Select the channel number by rotating the VFO and

pressing E.

4. Edit the frequency by using 

(decimal key) or the keypad and
pressing E.

If you enter a frequency which has been stored in another
channel, you will hear a beep and the channel stored displays

WARNING

.

Press 

(decimal key) to clear and start again.

––– OR –––
Press E again to store the frequency in both channels.

You can transfer a frequency that has been stored in a
channel to another channel.

1. Press HOLD/MAN.

27

          C 010
 512.0000 NFM
ERROR
OUT OF CHANNEL 

          C 010
 512.0000 NFM
ERROR
OUT OF BAND 

          C 010
 512.0000 NFM
WARNING
DUPLICATE 17 

BC250D  9/20/2 2:52 PM  Page 27