Uniden America Corporation UB315 사용자 설명서

1. After programming frequencies, 

simply press SCAN to begin scanning.
During scanning, when you rotate the
VFO, you can select the direction 
(

↑

or 

↓

) you want to scan.

2. The bank indicators selected for scanning appear on the

display, and the bank being currently monitored flashes.
You can deselect banks from active scanning by pressing
their number on your keypad. The indicator for each
deselected bank turns off, and the bank’s channels are not
scanned.

Note: One bank must always be active. You cannot

deactivate all ten banks at the same time. If you try to
turn off all the banks, the first bank is automatically
selected.

To restore a bank to active scanning, press the banks
number on your keypad.
The banks indicator will display again.

3. During normal scanning the

scanner skips 
unprogrammed or locked
out channels.

4. When a transmission is

received, the scanner stops 
on that channel. When the
transmission ends, scanning
resumes automatically.

If you want to stop on a channel during
scanning, press HOLD/MAN.

If you want to resume scanning, press RSM.

There are several ways to access a
specific channel quickly.

1. Press HOLD/MAN.

2. Using the keypad, enter the channel

number.

3. Press HOLD/MAN again.

31

          C 001
1300.0000 NFM
25cm Amateur 1
UNIDEN Group A 

          C 001
SCAN
Bank  1234567890

BC250D  9/20/2 2:52 PM  Page 31