Uniden America Corporation UB315 사용자 설명서

Note: First you must set the search ranges through the menu

screen prior to any searching.

The BC250D can search up to 10 separate frequency ranges
to help you discover new stations in your area.

To set a Search Range, enter into the Menu mode.

1. Press MENU/BACK.

2. Select 

SERVICE  OPTION 

- 

CHAIN SERCH

-

SEARCH  RANGE 

- 

RANGE

- by rotating the VFO and

pressing E.

3. Enter the lowest frequency using the keypad and then

press E, then repeat the same for the
highest frequency.
Then press SEARCH.

––– OR –––

Another method is as follows:

1. Press and hold SEARCH for 2 seconds.

2. Program the lowest and highest frequencies by the same

way as step 3 above.

Note: • The scanner can continuously search up to 10

ranges. (Chain Search)

• You can select or deselect the search range freely

by pressing the corresponding number with the
keypad.

• The scanner automatically increases its search

speed from 100 to 300 steps per second for the
bands having 5 kHz steps. (Turbo Search)

• After you have set the search range through the

Menu at the first time for a range, you will be able to
set new ranges for the same range by using the
keypad and the standard direct entry method.

• Searching feature is applied to Control Channel Only

mode (see page 73). 

Caution: After you have entered the search range while still

in the menu mode, you can set your alpha tag (see
page 28), change the step size of the search, or
change the mode. Once the lower and upper

37

       12.5k
1240.0000 NFM
Range 1234567890

BC250D  9/20/2 2:52 PM  Page 37