Uniden America Corporation UB315 사용자 설명서

35

When Priority Scan is turned On, your scanner checks the
priority channel in the banks you selected every 2 seconds for
activity. If a signal is present on the priority channel, your
scanner monitors the channel until the transmission ends,
then resumes normal scanning. You can designate one
channel in each bank as a Priority Channel. By default, the
first channel in each bank is the Priority Channel, but you can
change this.

To activate Priority Scan (in either the Hold or Scan Mode):

1. Press PRI to select 

PRIORITY:ON

on the display.

Note: If you have locked out the priority

channel, 

ERROR

appears when

you select Priority mode.

2. Press PRI to select

PRIORITY:OFF

on the display to

deactivate Priority Scan.

If you want to resume normal scanning, when the scanner
stops, press RSM.

You cannot eliminate the Priority Channel, but you can
change it to any one of the 100 available channels in each
bank.

1. Press HOLD/MAN.

2. Select a new Priority Channel:

a. Enter the channel number using

the keypad.

b .Then press HOLD/MAN again.

3. Press and hold PRI for 2 seconds to

designate this channel as your new
Priority Channel.
A confirmation tone indicates that the
Priority Channel has been changed.
The 

P

icon appears on the display.

       
PRIORITY ON

          C 010
1240.0000 NFM
ERROR
PRI CH LOCKOUT 

          C 001
 512.0000 NFM
UHF TV 1
UNIDEN Group A 

BC250D  9/20/2 2:52 PM  Page 35