Uniden America Corporation UB315 사용자 설명서

talkgroup is not active, change the Scan List by using the
Menu screen.

Note: • Once you press SEARCH or SERVICE in one bank,

all trunking banks will change to that mode.

• Selecting a Scan List is also possible in the Menu

mode. (LTR only)

•

ID  SCAN

appears on the display during Trunk

Scan instead of simply 

SCAN

.

The delay of 5 seconds is automatically set for each talkgroup
for ID Scan mode and ID Search mode. To set the delay
feature, enter into the Menu mode.

1. Press MENU/BACK.

2. Select 

SCAN OPTION

-

TRUNK

by rotating the VFO and

pressing E.

3. Select the bank number by rotating the VFO and pressing

E.

4. Select 

DELAY

and then press E.

5. Rotate the VFO to select 

ON

or 

OFF

and then press E.

Note: If you want to verify Delay mode setting, press and

hold MENU/BACK for 2 seconds.

You can set priority in your trunking lists, just as you do in
your conventional ones. You can set the priority by pressing
and holding PRI for 2 seconds in ID Scan Hold mode. 
After you’ve set up your Scan List, press PRI to activate it.

It’s very similar to conventional priority although there is no
"interrupt" during the transmissions. Priorities are checked in
between transmissions.

With Priority On, you can hold on an ID in your Scan List,
such as Scan List 6, memory position 7, and the scanner will
check all the priorities in all the active Scan Lists in between
any transmissions on the ID on which you’re holding. The
lowest numbered priority will be checked first. For example,
the priority ID in List 1 will be checked before the priority in
List 2, etc.

Note: This function does not work in LTR tracking.

58

BC250D  9/20/2 2:52 PM  Page 58