Uniden America Corporation UB315 사용자 설명서

1. Press MENU/BACK.

2. Select 

SCAN OPTION

-

TRUNK

by rotating the VFO and

pressing E.

3. Select the bank number by rotating the VFO and pressing

E.

4. Select 

TALK  GROUP

by rotating the VFO and pressing

E.

5. Select the ID location by rotating the VFO or using the

keypad and then press E. (The first number represents the
ID list number and second number represents the memory
location number.) (Direct entry method example: enter "

1-

5

" by pressing 1, (decimal 

key), 

5.)

6. Select 

ID

by rotate the VFO and

then press E.

7. Enter the ID number using the

keypad and then press E.

Note: After you have programmed the ID in a selected bank

while still in the menu mode, you can set your alpha
tag (see page 28), or turn on the beep alert for an
individual talkgroup (see page 29).

a. Enter the Type 2 ID you want to

store, and press E.

––– OR –––

a. Enter the block number and

fleet number.

b. Press 

(decimal key).

c. Enter the sub fleet number, and press E.

––– OR –––

a. Enter the ID you want to store.

Use the 

(decimal key) for

the "dash".

b. Press E.

Hint:

Remember that Uniden's AFS format allows you to
enter full or partial EDACS IDs for powerful flexibility in
all modes. Be sure to read the section "EDACS
Reception" on page 64 to learn how this works.

56

          1-5

¡

ENTER ID 

           5-0
------
050-2

¡

ENTER ID 

            5-0
------
09-022

¡

 

ENTER ID

           5-0
4128
1216

¡

ENTER ID 

BC250D  9/20/2 2:52 PM  Page 56