Honeywell International Inc. KSN770 사용자 설명서
Draft
Page 1-2
6 Dec 2012
34-70-06
SYSTEM INSTALLATION MANUAL
066-01204 / 066-01213
© Honeywell International Inc. Do not copy without express permission of Honeywell.
C.
Information on the KSN 7xx is displayed on a large, easy-to-read color LCD. Pilot information is
input to the unit via flexible combination of touchscreen and graphics interface combined with
cursor control and by the 16 push buttons on the front panel.
input to the unit via flexible combination of touchscreen and graphics interface combined with
cursor control and by the 16 push buttons on the front panel.
D.
An optional NAV receiver and COM transceiver that will allow integrated navigation and
communications on KSN 7xx units so equipped.
communications on KSN 7xx units so equipped.
The KSN 7xx can use its present position information to determine crosstrack error,
distance-to-waypoint, ground speed, track angle, time-to-waypoint and bearing to waypoint.
distance-to-waypoint, ground speed, track angle, time-to-waypoint and bearing to waypoint.
The KSN 7xx can provide navigation data to external displays and autopilots. Some of this data is output
to external devices.
to external devices.
The internal database of the KSN 7xx contains information concerning airports, VOR, NDB, SUAs,
airport runways and frequency location information, and nearest FSS and ARTCC names and
frequencies. Waypoints are stored in the database by their ICAO identifiers. The ICAO identifiers are
(in most cases) taken directly from Jeppesen or government aeronautical charts.
airport runways and frequency location information, and nearest FSS and ARTCC names and
frequencies. Waypoints are stored in the database by their ICAO identifiers. The ICAO identifiers are
(in most cases) taken directly from Jeppesen or government aeronautical charts.
1.3.2
GPS Antenna
The KA 96 GPS antenna, PN 071-01620-0001 or equivalent is the designated antenna for the KSN 7xx.
1.3.3
KCM 200 Configuration Module
The configuration module is used to store some installation specific information, which is used by the
KSN 7xx. The KCM 200 configuration module used with the KSN 7xx, is supplied with the KSN 7xx and
is also available under PN 071-00188-1101.
KSN 7xx. The KCM 200 configuration module used with the KSN 7xx, is supplied with the KSN 7xx and
is also available under PN 071-00188-1101.
1.4
Technical Characteristics
Refer to Table 1-2 for the KSN 765 Safety Navigator leading particulars.
Refer to Table 1-3 for the KSN 770 Safety Navigator leading particulars.
Table 1-2. KSN 765 Safety Navigator Leading Particulars
Characteristic
Specification
TSO compliance
TSO C146c, TSO-C165, TSO-C113, TSO-C63c,
TSO-C147, TSO-C118, TSO-C157a, TSO-C110a,
TSO-C151b, ETSO-2C63c
TSO-C147, TSO-C118, TSO-C157a, TSO-C110a,
TSO-C151b, ETSO-2C63c
Length
11.80 inches (299.8 mm)
Width
6.25 inches (158.8 mm)
Height
5.40 inches (137.2 mm)
Weight
Mounting
Panel mount
Environmental conditions
RTCA/DO-160G
Temperature
4 to 131°F (
20 to +55°C)
Altitude
25,000 feet (7,620 meters)
Draft as of 10/15/2012