E F Johnson Company 2425372 사용자 설명서

Corupt Prm - The radio has detected that its profile/user parameters are not valid because 
the functional blocks can not be identified.

Denied - A group call attempt has received a DENIED response from the system.

Deny - A unit or interconnect call attempt has received a DENIED response from the 
system.

Disabled - The feature that the user is attempting to use has been disabled on the radio 
either by programming or by factory options.

DSP Failed - The main processor and the DSP have failed to complete their startup 
procedure at powerup.

EEPRM Fail - The main processor has timed out while trying to validate or invalidate the 
profile/user parameters in the EEPROM.

Encryp Bad - The main processor and the Encryption Module have failed to complete 
their startup procedure at power up.

Fixed High - The selected channel or group is strapped to high power and thus low power 
can not be selected.

Fixed Low - The selected channel or group is strapped to low power and thus high power 
can not be selected.

Too Hot - The mobile has passed the hot temperature threshold. Under these conditions 
the radio will only transmit in low power.

Invalid - The received input from the user does not fit the criteria necessary for the 
feature.

Invalid ID - The received ID from the user was not a valid ID.

Invald Key - The key pressed by the user was not valid for the current situation.

Invld Ch - The channel entered by the user in keypad programming is not valid.

Key Fail - The encryption key required by the current selected group/channel is not valid.

Kypd Lockd - The keypad lock function is active and key presses are not accepted in this 
mode.

Kset Fail - The encryption key set chosen by the user is not valid.

List Only - Direct entry of a unit ID or phone number is disabled.

Locked - A selector lock command has been received and zone and channel changes are 
not accepted.