E F Johnson Company 2425372 Manual Do Utilizador
Draft
-4 5300 ES Series Mobile Radio Operating Manual
December 2006
Corupt Prm - The radio has detected that its profile/user parameters are not valid because
the functional blocks can not be identified.
the functional blocks can not be identified.
Denied - A group call attempt has received a DENIED response from the system.
Deny - A unit or interconnect call attempt has received a DENIED response from the
system.
system.
Disabled - The feature that the user is attempting to use has been disabled on the radio
either by programming or by factory options.
either by programming or by factory options.
DSP Failed - The main processor and the DSP have failed to complete their startup
procedure at powerup.
procedure at powerup.
EEPRM Fail - The main processor has timed out while trying to validate or invalidate the
profile/user parameters in the EEPROM.
profile/user parameters in the EEPROM.
Encryp Bad - The main processor and the Encryption Module have failed to complete
their startup procedure at power up.
their startup procedure at power up.
Fixed High - The selected channel or group is strapped to high power and thus low power
can not be selected.
can not be selected.
Fixed Low - The selected channel or group is strapped to low power and thus high power
can not be selected.
can not be selected.
Too Hot - The mobile has passed the hot temperature threshold. Under these conditions
the radio will only transmit in low power.
the radio will only transmit in low power.
Invalid - The received input from the user does not fit the criteria necessary for the
feature.
feature.
Invalid ID - The received ID from the user was not a valid ID.
Invald Key - The key pressed by the user was not valid for the current situation.
Invld Ch - The channel entered by the user in keypad programming is not valid.
Key Fail - The encryption key required by the current selected group/channel is not valid.
Kypd Lockd - The keypad lock function is active and key presses are not accepted in this
mode.
mode.
Kset Fail - The encryption key set chosen by the user is not valid.
List Only - Direct entry of a unit ID or phone number is disabled.
Locked - A selector lock command has been received and zone and channel changes are
not accepted.
not accepted.