Motorola Solutions Inc. 92FT7039 사용자 설명서
7
English
Approved Accessories
• This radio has been tested and meets RF Safety Standards when used with
the Motorola accessories supplied or designated for this product. Use of other
accessories may result in non-compliance with RF Safety Standards.
accessories may result in non-compliance with RF Safety Standards.
• For a list of Motorola-approved antennas and accessories, refer to the user
manual for your radio model.
Additional Information
For additional information on exposure requirements or other training
information, visit http://www.motorola.com/rfhealth.
information, visit http://www.motorola.com/rfhealth.
Compliance and Control Guidelines and Operating Instructions for
Mobile Two-Way Radios Installed as Fixed Site Control Stations
Mobile Two-Way Radios Installed as Fixed Site Control Stations
If mobile radio equipment is installed at a fixed location and operated as a control
station or as a fixed unit, the antenna installation must comply with the following
requirements in order to ensure optimal performance and compliance with the RF
energy exposure limits in the standards and guidelines listed on page 4:• The antenna should be mounted outside the building on the roof or a tower if at
station or as a fixed unit, the antenna installation must comply with the following
requirements in order to ensure optimal performance and compliance with the RF
energy exposure limits in the standards and guidelines listed on page 4:• The antenna should be mounted outside the building on the roof or a tower if at
all possible.
• As with all fixed site antenna installations, it is the responsibility of the licensee
to manage the site in accordance with applicable regulatory requirements and
may require additional compliance actions such as site survey measurements,
signage, and site access restrictions in order to ensure that exposure limits are
not exceeded.
may require additional compliance actions such as site survey measurements,
signage, and site access restrictions in order to ensure that exposure limits are
not exceeded.
• For additional installation information, see the guidelines for minimum
separation distances provided above in the RF Exposure Compliance and
Control Guidelines and Operating Instructions section of this document.
Control Guidelines and Operating Instructions section of this document.
6881095C99-G.book Page 7 Tuesday, March 16, 2010 10:31 AM