Motorola Solutions Inc. 92FT7039 사용자 설명서

NOTE: Nearly every electronic device is susceptible to electromagnetic 

interference (EMI) if inadequately shielded, designed, or otherwise 
configured for electromagnetic compatibility. It may be necessary to 
conduct compatibility testing to determine if any electronic equipment used 
in or around vehicles or near fixed site antenna is sensitive to external RF 
energy or if any procedures need to be followed to eliminate or mitigate the 
potential for interaction between the radio transmitter and the equipment 
or device.

To avoid electromagnetic interference and/or compatibility conflicts, turn off your 
radio in any facility where posted notices instruct you to do so. Hospitals or 
health care facilities may be using equipment that is sensitive to external RF energy.

To avoid possible interaction between the radio transmitter and any vehicle 
electronic control modules, such as ABS, engine, or transmission controls, the 
radio should be installed only by an experienced installer and the following 
precautions should be used when installing the radio: 
1. Refer to the manufacturer’s instructions or other technical bulletins for 

recommendations on radio installation. 

2. Before installing the radio, determine the location of the electronic control 

modules and their harnesses in the vehicle.

3. Route all radio wiring, including the antenna transmission line, as far away as 

possible from the electronic control units and associated wiring.

6881095C99-G.book  Page 8  Tuesday, March 16, 2010  10:31 AM