Nihon Kohden Corporation ZM-541PAA 사용자 설명서
62
ZM-540PA, ZM-541PA Operator’s Manual
Connecting the SpO
2
Probe to the Transmitter
&RQQHFWWKHSUREHWRWKH6S2
2
VRFNHWRQWKHWUDQVPLWWHU
NOTE: Hold the connector of the probe cable when connecting or disconnecting the
probe. Pulling the cable may damage the probe.
When transmitter is attached on an arm
Do not shake or swing the transmitter while holding
the leads or cables connected to the transmitter.
The transmitter may come off and injure someone
or damage surrounding instruments.
the leads or cables connected to the transmitter.
The transmitter may come off and injure someone
or damage surrounding instruments.
CAUTION
Do not use a damaged or disassembled probe. It
causes incorrect measurement and may injure the
patient.
causes incorrect measurement and may injure the
patient.
CAUTION