Cobra Electronics Corporation PR5000 사용자 설명서

Customer Assistance

Warranty

Introduction

Comes Close to a Cobra

®

Your microTALK

®

radio has 10 Memory Locations for storing 

your most frequently used channels and channel/privacy code
combinations. These Memory Locations can be selected individually
or can be scanned. (See page 20 for memory location scan.)

1. Press the Lock/Mode button until the 

Memory icon and the memory location 
flash on the display.

2. Press the Channel Up or Channel Down

button to select the memory location 
(0 through 9).

If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.

3. Press the Hi•Low/Enter button to enter 

a new memory location or edit an already
programmed memory location. The channel
numbers will flash on the display.

4. Press the Channel Up or Channel Down

button to select a channel (1 through 22).

5. Press the Hi•Low/Enter button. 

The CTCSS icon and privacy code 
numbers will flash on the display.

6. Press the Channel Up or Channel Down

button to select a CTCSS privacy code 
(01 through 38) for the channel.

7. Choose one of the following:

a. Press the Hi•Low/Enter button to enter 

the channel/privacy code in the selected
memory location and return to Step 1 
to program another memory location.

b. Press the Lock/Mode button to 

enter the channel/privacy code in 
the selected memory location and 
proceed to other functions on the
channel/privacy code displayed 
before you entered mode functions.

c. Press the Talk button to enter the

channel/privacy code in the selected
memory location and exit mode functions.
Upon release of the Talk button, the 
radio will enter Standby mode on the
channel/privacy code just entered.

1. Press the Lock/Mode button until the Memory

icon and the memory location number flash
on the display.

2. Press the Channel Up or Channel Down button

to select a memory location (0 through 9). 

If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.

3. Press the Talk button to return to Standby

mode on the selected memory location.

A memory location can be reprogrammed
at any time it is displayed. Press the
Hi•Low/Enter button to begin.

While recalling a stored memory location, if you
do not press any buttons for 15 seconds, your
radio will automatically return to Standby mode
on the channel/privacy code displayed before 
you entered mode functions.