Cobra Electronics Corporation PR5000 사용자 설명서

Customer Assistance

Warranty

Introduction

Comes Close to a Cobra

®

Your microTALK

®

radio can automatically scan channels.

1. Press the Lock/Mode button until the 

Scan icon and the channel numbers 
flash on the display.

2. Press the Channel Up or Channel Down

button to begin scanning channels.

The radio ignores specific privacy 
codes while scanning channels.

The Scan icon will continue to be displayed 
when scan is on. Your radio will continue to 
scan all channels and stop if an incoming
transmission is detected. Your radio will 
remain on that channel for 10 seconds. 

While setting channel scan, if you do not 
press any buttons for 15 seconds, your radio 
will automatically return to Standby mode on 
the channel or channel/privacy code displayed
before you entered mode functions.

1. Press the Lock/Mode button until the 

Memory icon and the memory location 
flash on the display.

2. Press the Channel Up or Channel Down

button to select the memory location 
(0 through 9).

If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.

3. Press the Hi•Low/Enter button. The channel

numbers will flash on the display.

4. Press the Channel Up or Channel Down

button to select Channel 0.

5. Choose one of the following:

a. Press the Hi•Low/Enter button to enter 

the channel/privacy code in the selected
memory location and return to the
beginning of memory location options. 

b. Press the Lock/Mode button to 

enter the channel/privacy code in 
the selected memory location and 
proceed to other functions on the
channel/privacy code displayed 
before you entered mode functions.

While de-programming a memory location, 
if you do not press any buttons for 15 seconds,
your radio will automatically return to Standby
mode on the channel/privacy code displayed
before you entered mode functions.