Casio Computer Co Ltd XJH1750 사용자 설명서

Your projector supports projection of 3D images. To project a 3D image, first enter the projector’s 3D 
input mode, and then select the input source.

Important!

z Separately available 3D glasses (YA-G30) are required in order to view a projected 3D image in 

3D.

z Separately available special software (CASIO 3D Converter) is required to project a 3D image 

with the projector when a computer (analog RGB) is the input source.

The input sources described below can be selected for projection in the 3D Input Mode.

Note

See “3D Signals (3D Input Mode)” (page 54) for a list of 3D image signals supported by this 
projector.

T] and [S] keys to move the highlighting to “To 3D input mode” and 

z This enters the 3D input mode and closes the input source selection screen.

Important!

z You cannot select HDMI or USB as the input source in the 3D input mode. To use either of 

these input sources, change the input source setting back to normal input mode.

z When Computer 1 (or Computer 2) is selected as the input source in the 3D input mode, a 

component video signal input through the projector’s COMPUTER IN 1 (or COMPUTER IN 2) 
terminal is treated as an RGB signal resulting in abnormal image projection.

z Except when using the projector for 3D image projection, you should normally leave it in the 

normal input mode.

Computer (Analog RGB)

z Any of the following types of 3D image data played back using separately available 

special software (CASIO 3D Converter).
– 2D image file converted to a 3D image file using CASIO 3D Converter
– Side-by-side 3D format files

z Signal with 60Hz/120Hz vertical scan frequency

Composite Video, S-video

z Field sequential 3D format files recorded with field sequential DVD software, etc.
z Signal with 60Hz vertical scan frequency