Mitsubishi Electric Corp HS-U577 사용자 설명서

56

• Check that the programmed recording light lights up in the front panel

display.

• Check the clock time.
• Make sure you have turned the VCR off before the start time.

• Check the tracking control.  Adjust manually if necessary.

• Check the monitor settings.
• Check the quality of the video tape.

• Try automatic head cleaning.
• Clean the video heads using a dry-type video head cleaning cassette.

Do not use a wet-type cleaning cassette, as it may damage your
VCR.  Excessive use of a cleaning cassette could shorten head life.
Follow the cleaning instructions carefully.

• Have the VCR video heads cleaned by a qualified service technician.

• Check that remote mode of the VCR and your remote are set

correctly (VCR-A or VCR-B).

• Check to see that the VCR/TV slide switch is set to the correct

position.

• Change the batteries.

• Try moving the IR Emitter so that there is a clear line of sight between

the Emitter and the box’s remote sensor.

• Check that the IR Emitter is connected properly.
• Sometimes a cable box need to be set by the cable company to

receive signals.  Contact your cable company.

• In order to protect your tapes and the VCR heads, the Fast

Forwarding/Rewinding Speed will be slower than 500x under the
following conditions:
1 Use of tapes shorter in length than T-120 (for example, T-30, T-60,

T-90).

2 Activating fast forwarding or rewinding from the middle of the tape.

The VCR timer recording does
not operate.

Noise in the picture and
distorted sound.

Poor or no Hi-Fi sound.

Playback is noisy or “snowy”.

VCR remote does not function.

Your converter box or satellite
receiver does not respond to
any signals from the VCR’s IR
Emitter.

The fast forwarding/rewinding
speed is slow.