Chengdu Diyue Technology Co. Ltd. SZU06C 사용자 설명서
SZU06C2 Product Manual
SZU06C2 PM(Rev 2.0)
19
11
Reliability Test
To guarantee the environment adaptability of SZU06C2, we have done the the following
measurements.
Table 11-1 Reliability Test of SZU06C2
No
Test items
Test methods
1
Vibration test
Setting the vibration frequency of 50Hz, amplitude of 1.5mm,
and each side of XYZ vibrates for 20 minutes respectively
and each side of XYZ vibrates for 20 minutes respectively
2
Shock test
The module is dropped from the height of 50cm to hard floor to
carry out the test for 3 times
carry out the test for 3 times
3
Heat cycle test
Charged operation of module: start temperature of cycle:
25℃-->-40℃ (30 minutes) -->85℃ (30 minutes), for 5 cycles
between high and low temperature
25℃-->-40℃ (30 minutes) -->85℃ (30 minutes), for 5 cycles
between high and low temperature
4
Moisture test
Module operates at the environment of + 60℃ and 90% RH for
24 hours
24 hours
5
Low temperature
cold start test
cold start test
Module will be powered after placed in the environment of
-40℃ for 1 hour
-40℃ for 1 hour
6
Low temperature
test
test
Operating in the environment of -40℃ for 3 * 24 hours
7
High temperature
test
test
Operating in the environment of +85℃ for 3 * 24 hours