Bosch Security Systems BV NDE8000 사용자 설명서

FLEXIDOME IP starlight 8000i

Connection via the web browser | en

Bosch Security Systems

Installation Manual

2018.11 | 01 |

The unit must have a valid IP address and a compatible subnet mask to operate on your

network. By default, DHCP is pre-set at the factory to On and so your DHCP server assigns an

IP address. With no DHCP server the default address is 192.168.0.1

To view the camera in your web browser:

1.

Start the Web browser.

2.

Enter the IP address of the unit as the URL.

3.

During initial installation, confirm any security questions that appear.

To see live images in your browser it might be necessary to download and install the MPEG-

ActiveX from the Bosch download store.

If a RADIUS server is used for network access control (802.1x authentication), the unit must

be configured first. To configure the unit, connect it directly to a computer using a network

cable and configure the two parameters, Identity and Password. Only after these have been

configured can communication with the unit via the network occur.

Alternatively, use the IP Helper tool to detect Bosch devices on the network:

1.

Access the Bosch download store (http://downloadstore.boschsecurity.com/).

2.

Download and install IP Helper.

3.

Choose your specific camera from the list of cameras shown in the table on the left of the

screen

4.

Click Open in browser to view the camera interface.