Dongguan Huahong Electrical Appliances Co. Ltd FS-S180 사용자 설명서
of the light. A total of five light levels can be selected, the sixth level
lights off. Power on default lighting level 3.
10.USB:USB disk
11. TF:TF disk
12. AUX:Signal input
13. AC 100-240V power seat
DECRIPTION OF PLAYBACK PANEL
Notes:
1.Welcome to use our audio system, pls, send back to
the designated maintenances locationor Agent if you
found the quality problem. The warranty is 1year.
2.The defective or damages caused from the
un-correct disassembly or human action is notunder
the warranty content.
3.Pls. keep this card at safe and do never make any
dirty on the surface.
OPERATION MANNUL
MODEL:FS-180
1. Please connect the sound sources and powers in accordance with
the sketch map.
2. When all of the units are connected correctly, turn on the power switch.
3. Open your sound sources, then adjust the volume knobs of the
different channels for a satisfied personalized effect.
4. After your use, please turn off the power supply switches.
OPERATION
Bluetooth connectivity
1.Signal input line 1 pcs
2.AC power line 1 pcs
3.Operation manual 1 pcs
Attachment
Speaker Size: 3"x2
Frequency Response: 80Hz - 20KHz
S/N Ratio:≥70dB
Output Power: 18W
Power: AC 100-240V
SPECIFICATIONS
PORTABLE MULTIMEDIA BLUETOOTH SPEAKERS
8 910
11
1. :
Short press start up, long press shut down.
2. /-:
Short press this button to paly the previous song,Long press
this button to lower the volume.
3. /+:
Short press this button to paly the next song,Long press this
button to increase the volume.
4. :Short press the button to play the music,and Press the button again
to pause the music.Long Press the button to pair the other speaker unit,
these two speakers are play the much Synchronized.
5. MODE:Press this button to Bluetooth mode,press once into the USB
mode,press once into the TF mode,press once into the AUX mode,
and then press back to Bluetooth mode.In USB/TF mode, the USB is inserted
to play preferentially. USB and TF card at the same time,after the insertion
priority.
6. :Short press to select the light color,The color will be Blue/Purple/red
/orange/green in sequence.Long press can set the machine’s working time,
The right four lights indicate the working time ,it will be 2 hours/4 hours
/6 hours/8 hours.All lights on the four lights do not limit the time.
7. LIGHT:After selecting a light color, press this button to adjust the intensity
TWS
COLOUR
TIME
Method one:
1. Boot automatically into Bluetooth mode.
2.Open the phone NFC function, close to the top of the speaker NFC
logo, Bluetooth automatically connected.
Method two:
1. Boot automatically into Bluetooth mode.
2. Switch on the Wireless Bluetooth connection function of Mobile phone and
searching, while the Mobile phone shows “FS-180”,click the connect
directly. Mobile phone connection do not need password,if need
password, please input “0000” to go on pariring. After successpairing,
the speaker will send out a voice of prompt. it is successpairing between
mobile phone and wireless Bluetooth connection speaker.
3. Play the music of your mobile phone directly and will give out beautiful
voice from speaker.
1
2
3
4
5
6
7
MODE
COLOUR
TIME
LIGHT
2H
4H 6H 8H
TWS
/-
/+