Dongguan Huahong Electrical Appliances Co. Ltd FS-S180 用户手册

     of the light. A total of five light levels can be selected, the sixth level 

     lights off. Power on default lighting level 3.

10.USB:USB disk

11. TF:TF disk

12. AUX:Signal input

13. AC 100-240V power seat

DECRIPTION OF PLAYBACK PANEL

Notes:

1.Welcome to use our audio system, pls, send back to 

    the designated maintenances locationor Agent if you 

    found the quality problem. The warranty is 1year.

2.The defective  or damages caused from the 

    un-correct disassembly or human action is notunder 

    the warranty content.

3.Pls. keep this card at safe and do never make any 

   dirty on the surface.

MODEL:FS-180

1. Please connect the sound sources and powers in accordance with 

    the sketch map.

2. When all of the units are connected correctly, turn on the power switch.

3. Open your sound sources, then adjust the volume knobs of the 

    different channels for a satisfied personalized effect.

4. After your use, please turn off the power supply switches.

OPERATION

Bluetooth connectivity

1.Signal input line             1 pcs

2.AC power line                1 pcs

3.Operation manual          1 pcs

Attachment

Speaker Size: 3"x2

Frequency Response: 80Hz - 20KHz

S/N Ratio:≥70dB

Output Power: 18W

Power: AC 100-240V

SPECIFICATIONS

8 910

11

1.      :

Short press start up, long press shut down.

2.     /-:

Short press this button to paly the previous song,Long press 

    this button to lower the volume. 

3.      /+:

Short press this button to paly the next  song,Long press this 

    button to increase the volume.

4.       :Short press the button to play the music,and Press the button again

    to pause the music.Long Press the button to pair the other speaker unit,

    these two speakers are play the much Synchronized.

5. MODE:Press this button to Bluetooth mode,press once into the USB

    mode,press once into the TF mode,press once into the AUX mode, 

    and then press back to Bluetooth mode.In USB/TF mode, the USB is inserted 

    to play preferentially. USB and TF card at the same time,after the insertion 

    priority.

6.        :Short press to select the light color,The color will be Blue/Purple/red

    /orange/green  in sequence.Long press can set  the machine’s working time,

    The right four lights indicate the working time ,it will be 2 hours/4 hours

    /6 hours/8 hours.All lights on the four lights do not limit the time.

7. LIGHT:After selecting a light color, press this button to adjust the intensity 

Method one:

    1. Boot automatically into Bluetooth mode.

    2.Open the phone NFC function, close to the top of the speaker NFC 

       logo, Bluetooth automatically connected.

Method two:

   1. Boot automatically into Bluetooth mode.

   2. Switch on the Wireless Bluetooth connection function of Mobile phone and

       searching, while the Mobile phone shows “FS-180”,click the connect 

       directly. Mobile phone connection do not need password,if need 

       password, please input “0000” to go on pariring. After successpairing, 

       the speaker will send out a voice of prompt. it is successpairing between 

       mobile phone and wireless Bluetooth connection speaker.

   3. Play the music of your mobile phone directly and will give out beautiful

       voice from speaker.                  

1

2

3

4

5

6

7