ARRIS Group Inc. SBG941 사용자 설명서

B 

2 • Product Overview 

8 

  

Green: Wi-Fi enabled with 
encrypted wireless data 
activity. Long/short flash 
indicates mobile pairing in 
progress. 

Amber: Wi-Fi enabled with 
unencrypted wireless data 
activity. 

Green: Wireless pairing success-fully 
established between the SBG941 
and another Wi-Fi enabled device on 
your network — printer, PDA, laptop, 
etc. 

Amber: Mobile pairing was 
successful. LED turns green after five 
minutes. 

START  Not applicable — LED does 

not flash 

Green: WPS button is pressed and 
Wi-Fi Protected Security is activated.  

LED will remain on until WPS button is 
released. 

Rear Panel Overview 

 

 

Both the SBG941 and SBG941U (shown above) rear panels contain the following cabling 
port and connectors: 

 

Ethernet-ports: 

Activity LED — Green LED defines the activity of the Ethernet connector 

• 

LED is ON — Indicates a 100Base-T negotiated data rate 

• 

LED is FLASHING — Indicates activity is detected on the port 

• 

LED is OFF — Indicates the unit is not powered or there is no 100Base-T 
Ethernet connection