ARRIS Group Inc. SBG941 사용자 설명서
B
2 • Product Overview
9
Item
Description
ETHERNET
1 2 3 4
(continued)
(continued)
10/100 LED — Indicates the connection data rate
•
Green LED is ON — Indicates a 100Base-T data connection
•
Amber LED is ON — Indicates a 10Base-T negotiated data rate
•
Amber LED is
FLASHING
— Indicates there is activity on the Ethernet
connection when in 10Base-T rate
•
Amber LED is OFF— Indicates the device is not powered on or there is
no 10Base-T connection
no 10Base-T connection
2 USB
For Windows only, used for connecting a PC to the SBG941U.
You cannot connect a Macintosh or UNIX
You cannot connect a Macintosh or UNIX
®
computer to the USB port on the
SBG941U.
Front panel LINK LED will turn ON when a USB device is connected and a
link is established.
Note: USB connector is available on SBG941U models only.
Front panel LINK LED will turn ON when a USB device is connected and a
link is established.
Note: USB connector is available on SBG941U models only.
3 CABLE
Coaxial cable connector
4 RESET
Resets the cable modem which may take from five to 30 minutes.
5 POWER
+12VDC Power connector
MAC Label Overview
The SBG941 Media Access Control (MAC) label contains the MAC address which is a
unique, 48-bit value that identifies each Ethernet network device. To receive data
service, you will need to provide the MAC address marked HFC MAC ID to your Internet
Service provider.
unique, 48-bit value that identifies each Ethernet network device. To receive data
service, you will need to provide the MAC address marked HFC MAC ID to your Internet
Service provider.