ICOM 291400 사용자 설명서
62
9
CONNECTIONS AND MAINTENANCE
New2001
■ UT-98/UT-112 installation
CAUTION: DISCONNECT the DC power cable from the
transceiver before performing any work on the transceiver.
Otherwise, there is danger of electric shock and/or equip-
ment damage.
transceiver before performing any work on the transceiver.
Otherwise, there is danger of electric shock and/or equip-
ment damage.
Follow the case opening procedure shown here when you
want to install an optional scrambler unit.
want to install an optional scrambler unit.
q Remove the 6 screws as shown below and open the
transceiver.
w Disconnect the flat cable and NMEA (4 pin) from J5 of the
LOGIC unit.
e Install an optional unit (UT-98 or UT-112) to J3 on the AF
unit as shown below.
Optional unit
AF unit
q
LOGIC unit
NMEA (4 pin)
Flat cable
w
!IC-M504.qxd 05.12.28 11:30 AM Page 62 (1,1)