ICOM 297410 사용자 설명서
17
4
OTHER FUNCTIONS
Scanning automatically searches for weather channel sig-
nals.
Repeatedly scans all weather memory channels.
You can set the interval time (scan speed) for the scan in the
Settings menu. Refer to page 22 for details.
nals.
Repeatedly scans all weather memory channels.
You can set the interval time (scan speed) for the scan in the
Settings menu. Refer to page 22 for details.
Push
q
[RCL] to enter the memory mode, and then rotate
[O-DIAL] to select the weather memory channel.
Hold down
Hold down
w
[VOL] for two seconds to start a weather mem-
ory channel scan.
• “SEARCH“ blinks while scanning.
• To change the scan direction, turn
• To change the scan direction, turn
[DIAL].
• The scan continues even when receiving a signal on the active
frequency.
162.55
5
122.00
RX
WEATHER
SEARCH
When receiving a signal on the weather channel:
e
• “RX” blinks on the standby frequency display and the scan is
cancelled.
• “DUAL” is displayed on the active frequency display.
WEATHER
161.65
5
122.00
RX
DUAL
RX
WX08
When no signal is received on the weather channel:
r
• “NO WTH” is displayed even searches “WX01” to “WX10” chan-
nels for three times and the scan is cancelled.
Hold down
t
[VOL] for two seconds to cancel the scan man-
ually.
(For only U.S.A. version transceivers)
Scanning the
■
weather memory channels