ICOM 325000 사용자 설명서
51
9
SET MODE
D Memory bank link function (B-LINK)
Turns the memory bank link function ON (default) or OFF.
The link function provides continuous bank scan, scanning
all channels in the selected banks during bank scan.
The link function provides continuous bank scan, scanning
all channels in the selected banks during bank scan.
• Bank link setting
q Push [MODE] to enter the bank link setting mode.
w Rotate [DIAL] to select a bank that you want to change
the link setting.
e While holding down [FUNC], rotate [DIAL] to set the link
setting ON or OFF.
Setting is ON
Setting is OFF
r Repeat steps w and e until the bank link setting is fin-
ished.
t Push [TS] to exit the bank link setting mode.
D Program scan link function (P-LINK)
Sets the program scan link function. During program scan,
link function performs a continuous program scan in the se-
lected program scan number during program scan.
Default settings for LINK0 to LINK9;
PROG 1 to PROG 24 are linked, but PROG 0 is not linked.
link function performs a continuous program scan in the se-
lected program scan number during program scan.
Default settings for LINK0 to LINK9;
PROG 1 to PROG 24 are linked, but PROG 0 is not linked.
• Confirming program scan link
q Push to [MODE] to enter the program scan link setting.
w Rotate [DIAL] to select the program scan link number
that you want to confirm, then push [MODE].
• “LINK” appears.
• “LINK” appears.
e Push [MODE], then rotate [DIAL] to confirm the linked
program scans.
r Push [TS] three times to exit the program scan link setting.