ICOM 325000 Manual Do Utilizador

51

9

SET MODE

D Memory bank link function (B-LINK)

Turns the memory bank link function ON (default) or OFF. 
The link function provides continuous bank scan, scanning 
all channels in the selected banks during bank scan.

q Push [MODE] to enter the bank link setting mode.

w Rotate [DIAL] to select a bank that you want to change 

the link setting.

e While holding down [FUNC], rotate [DIAL] to set the link 

setting ON or OFF.

Setting is ON

Setting is OFF

r Repeat steps w and e until the bank link setting is fin-

ished.

t Push [TS] to exit the bank link setting mode.

D Program scan link function (P-LINK)

Sets the program scan link function. During program scan, 
link function performs a continuous program scan in the se-
lected program scan number during program scan.
Default settings for LINK0 to LINK9;
PROG 1 to PROG 24 are linked, but PROG 0 is not linked.

q Push to [MODE] to enter the program scan link setting.

w Rotate [DIAL] to select the program scan link number 

that you want to confirm, then push [MODE].
• “LINK” appears.

e Push [MODE], then rotate [DIAL] to confirm the linked 

program scans.

r Push [TS] three times to exit the program scan link setting.