ICOM AP-3 사용자 설명서

SETTING DATA INITIALIZATION

10

65

ı

Use the initialization procedure described below
when the current IP address is known and the AP-3
setting screen can be accessed. This procedure is
conducted from the [Initialize Settings] screen and
allows the scope of the initialization to be selected.
1. Disconnect all network devices except the AP-3 unit

and the setting terminal (wired or wireless) that will be
used to conduct the initialization. 

2. Start up the setting terminal. 
3. Open the web browser of the setting terminal.  
4. Designate the original factory-set IP address (

☞

p. 42)

in the URL text box and access the AP-3 setting
screen.

5. Click [Initialize Settings] in the setting screen selection

area (

☞

p. 42).

• The [Initialize Settings] screen is displayed.

6. Select the radio button next to the desired initialization

option (see below for details).

7. Click the [Initialize] button.

• While the AP-3 unit is restarting, the following mes-

sage is displayed.

8. The initialization is complete when AP-3 unit has

restarted and the [Wireless LAN Settings] screen is
displayed.

■

This option initializes all setting data adjusted from the
setting screen.

This option initializes all settings that can be adjusted
from the [Wireless LAN Settings] screens (

☞

section 8-

1, pp. 47 to 50). Access the [Wireless LAN Settings]
screens by clicking [Wireless LAN Settings] in the set-
ting screen selection area (

☞

p. 42).