ICOM AP-3 사용자 설명서
UTILITY SOFTWARE
12
67
This chapter explains how to use the Utility software
provided on the Utility Software disks, which are
included in the AP-3 package.
provided on the Utility Software disks, which are
included in the AP-3 package.
12-1 About the Utility
The Utility is a software application used to initialize
the setting data and update the firmware of the AP-3
unit.
Install the Utility software in a computer having one of the
following operating systems.
the setting data and update the firmware of the AP-3
unit.
Install the Utility software in a computer having one of the
following operating systems.
●
Windows 95, Windows 98
●
Windows NT 4.0, Windows 2000
12-2 Installing the Utility
1. Start Windows.
If Windows is already running, close all open applica-
tions.
tions.
2. Insert the floppy disk labeled “Utility Software (1/2)”
into the floppy disk drive.
3. Click <Start> and select [Run].
4. Type the name of the floppy disk drive and the filename
4. Type the name of the floppy disk drive and the filename
Setup.exe. Then click <OK> or press the [Enter] key.
• If the floppy disk drive is drive A, for example, type
• If the floppy disk drive is drive A, for example, type
“A:\Setup.”
5. Follow the instructions on the screen and inserted the
floppy disk labeled “Utility Software (2/2)” when
requested to do so.
requested to do so.
6. Click <OK> and continue following the instructions on
the screen.
7. After completing the installation, remove the floppy
disk from the floppy disk drive.