Savari Inc. SAV-S50 사용자 설명서
Savari S-50 Operations, Administration, Maintenance & Provisioning Guide
Savari Inc., Confidential
Copyright © Savari, Inc, 2014
Copyright © Savari, Inc, 2014
15
uplobelog
0
0 to 10
Upload number of
records of the OBE log
set by the RSE WSA
message.
0 indicates that upload
is disabled
0 < value < 11 indicates
the number of records to
upload.
The above parameter changes will take effect after a power cycle of the OBE.
7 Firmware Upgrade Procedure Using the CLI
The following is the procedure to upgrade the OBE firmware using the CLI:
1. Connect a local PC to the S-50 via Ethernet to mini-USB adaptor.
2. Assign the IP address to the PC to be in the same subnet of the S-50, preferably
192.168.40.1.
3. Download the image to be upgraded from the Savari FTP site to the PC.
4. Copy the image to the tftp server directory of the PC. Image should be names as
“Timage.tgz”. Ensure that the tftp server is running on the PC.
5. Login to the OBE using telnet and issue the following commands
6.
#cfg –a TFTP_SERVER=192.168.40.1
7.
#cfg –c
8.
#/etc/upgrade.sh
9. Power cycle the OBU when the upgrade process has completed (an “
upgrade done
”
message is displayed).