Security People Inc. dba Digilock LO6I02NAO01 사용자 설명서
SC-20-100D-10 Self-Contained RFID Latch
Operating Instructions
J-SC-20-1000-M_rev7 (PRE-PRODUCTION)
Page 2 of 4
2.
While the status indicator is solidly lit, contact the Manager
Key(s) one by one to the electronic key reader.
Key(s) one by one to the electronic key reader.
NOTE: The latch supports up to six Manager Keys.
Attempting to assign a seventh Manager Key will automatically
end the programming sequence.
end the programming sequence.
3.
Contact the Programming Key again to end the sequence.
4.
The latch will now operate with the assigned Programming Key
and Manager Key(s).
and Manager Key(s).
Assign Additional Manager Key(s)
(if less than six Manager Keys have been previously assigned)
1.
Press and hold the wake-up button. Continue to press the wake-
up button after the wake-up beep, until the latch emits the
programming beep once. When the button is released, the
status indicator will begin to flash.
up button after the wake-up beep, until the latch emits the
programming beep once. When the button is released, the
status indicator will begin to flash.
2.
While the status indicator is flashing, contact the Programming
Key to the electronic key reader.
Key to the electronic key reader.
3.
While the status indicator is solidly lit, contact the additional
Manager Key(s) to be assigned one by one to the electronic key
reader.
Manager Key(s) to be assigned one by one to the electronic key
reader.
NOTE: The latch supports up to six Manager Keys.
Attempting to assign a seventh Manager Key will automatically
end the programming sequence.
end the programming sequence.
4.
Contact the Programming Key again to end the sequence.
5.
The latch will now operate with the additional Manager Key(s).
Assign User Keys
Any combination of User Keys and RFID cards - up to a maximum of 20 -
can be assigned to a latch.
1.
Press and hold the wake-up button. Continue to press the wake-
up button after the wake-up beep, until the latch emits the
programming beep once. When the button is released, the
status indicator will begin to flash.
up button after the wake-up beep, until the latch emits the
programming beep once. When the button is released, the
status indicator will begin to flash.
2.
While the status indicator is flashing, contact the Manager Key to
the electronic key reader.
the electronic key reader.
3.
While the status indicator is solidly lit, contact the User Keys to
be enrolled one by one to the electronic key reader.
be enrolled one by one to the electronic key reader.
NOTE: If the maximum number of User Keys and RFID
cards has been reached, the latch will emit an error feedback
and the User Key will not be assigned.
and the User Key will not be assigned.
WARNING: Do not contact the Manager Key to the
electronic key reader before enrolling User Keys. Doing so, will
delete all previously enrolled User Keys and RFID cards.
delete all previously enrolled User Keys and RFID cards.
4.
Contact the Manager Key again to end the sequence.
5.
The latch will now operate with the assigned User Key(s).
Assign RFID Cards
Any combination of User Keys and RFID cards - up to a maximum of 20 -
can be assigned to a latch.
1.
Press and hold the wake-up button. Continue to press the wake-
up button after the wake-up beep, until the latch emits the
programming beep once. When the button is released, the
status indicator will begin to flash.
up button after the wake-up beep, until the latch emits the
programming beep once. When the button is released, the
status indicator will begin to flash.
2.
While the status indicator is flashing, contact the Manager Key to
the electronic key reader.
the electronic key reader.
3.
While the status indicator is solidly lit, present the RFID cards to
be enrolled one by one to the latch.
be enrolled one by one to the latch.
NOTE: If the maximum number of User Keys and RFID
cards has been reached, the latch will emit an error feedback
and the RFID card will not be assigned.
and the RFID card will not be assigned.
WARNING: Do not contact the Manager Key to the
electronic key reader before enrolling RFID cards. Doing so, will
delete all previously enrolled User Keys and RFID cards.
delete all previously enrolled User Keys and RFID cards.
4.
Contact the Manager Key again to end the sequence.
5.
The latch will now operate with the enrolled RFID card(s).
Delete All User Keys and RFID Cards
1.
Press and hold the wake-up button. Continue to press the wake-
up button after the wake-up beep, until the latch emits the
programming beep once. When the button is released, the
status indicator will begin to flash.
up button after the wake-up beep, until the latch emits the
programming beep once. When the button is released, the
status indicator will begin to flash.
2.
While the status indicator is flashing, contact an assigned
Manager Key to the electronic key reader.
Manager Key to the electronic key reader.
3.
While the status indicator is solidly lit, contact the Manager Key
again to the electronic key reader.
again to the electronic key reader.
4.
The latch will emit a confirmation feedback to indicate deletion
has been completed.
has been completed.
5.
All previously assigned User Keys and RFID cards will no longer
operate the latch.
operate the latch.
Delete All Manager Keys
1.
Press and hold the wake-up button. Continue to press the wake-
up button after the wake-up beep, until the latch emits the
programming beep once. When the button is released, the
status indicator will begin to flash.
up button after the wake-up beep, until the latch emits the
programming beep once. When the button is released, the
status indicator will begin to flash.
2.
While the status indicator is flashing, contact the Programming
Key to the electronic key reader.
Key to the electronic key reader.
3.
While the status indicator is solidly lit, contact the Programming
Key again to the electronic key reader.
Key again to the electronic key reader.
4.
The latch will emit a confirmation feedback to indicate deletion
has been completed.
has been completed.
5.
All previously assigned Manager Keys will no longer operate the
latch.
latch.
Express Registration
Of Manager Keys
1.
On the lock with the assigned Manager Key(s) to be copied,
press and hold the wake-up button. Continue to press the wake-
up button after the wake-up beep and first programming beep,
until the latch emits the programming beep twice. When the
button is released, the status indicator will begin to flash.
press and hold the wake-up button. Continue to press the wake-
up button after the wake-up beep and first programming beep,
until the latch emits the programming beep twice. When the
button is released, the status indicator will begin to flash.
2.
While the status indicator is flashing, touch the Programming
Key to the lock until the lock emits two confirmation beeps.
Key to the lock until the lock emits two confirmation beeps.
3.
Touch the Programming Key to the lock requiring registration
until the lock emits two confirmation beeps indicating successful
express registration.
until the lock emits two confirmation beeps indicating successful
express registration.
4.
Continue to touch the Programming Key to all locks requiring
registration.
registration.
5.
To end the express registration sequence, press the wake-up
button on any registered lock then touch the Programming Key
to the lock until it operates indicating that the express registration
sequence has ended.
button on any registered lock then touch the Programming Key
to the lock until it operates indicating that the express registration
sequence has ended.
WARNING: The programming key will continue to operate in Express
Registration mode unless Step #5 is performed.